Lawn sod contains the layer of soil to which the grassroots are bound, its roots as well as the grass. The quickest way to clear a lawn for garden beds or walk ways will be to move the sod, implementing a herbicide or revealing the apparent soil under, instead of tilling, smothering. It is possible to use it to fill in bare spots or generate new aspects of lawn when you eliminate a portion of of sod in the lawn. It’s possible for you to rent sod cutters if if you are relocating tiny parts of of garden sod, but you do not require them.
Prepare Bare Soil for New Lawn Sod
Water the soil that is bare completely. Do the planning 1 day before installing the garden sod you’ve got plenty of time to reduce and lay the sod in just one day and therefore the soil settles.
Till the soil to a depth of 6 to 8″ to separation settled soil.
Add 2 inches of organic compost to the soil.
Add several inches of sand for those who have clay soil to improve drainage.
Till the region again to perform in the amendments.
Rake the soil to produce a smooth surface.
A phosphorous- fertilizer and water the soil on the day you plan to to put the garden sod that is new.
Moving Garden Sod
Before eliminating the sod, mow the lawn the day. This guarantees when you retract the cut sod, the grass height is manageable.
Mark the section of garden sod you want to eliminate with landscape paint. Create a rectangle of size, any length you could easily raise when the sod is cut and about 1 foot-wide. When eliminating sod this step isn’t needed to finish the task, but keeps cuts.
Position the sod cutter a-T one corner of the rectangle that is marked. It’s flat and h-AS sharpened edges to allow it to be easy to cut-through the garden sod, although a sod cutter appears similar to a shovel. In case you choose maybe not to purchase a sod cutter for this a sharpened shovel is an ideal option.
Place one-foot on the sod cutter and push-down to cut-through the sod layer. Continue pushing before the blade is buried as well as your footrests on the bottom.
Reposition the sod cutter next to the prior cut and push-down to cut via the sod. Repeat this method to slice the the sod across the complete rectangle. It might help to overlap the cuts somewhat to assure the sod cutter does not skip tiny parts of of sod.
Push a shovel that is flat into the cut sod, starting in the slim end-of the rectangle. Along with your foot on the shovel, push in and pullback on the handle to pry the sod layer free in the remaining soil. Repeat every one of the way before the sod across the rectangle is free.
Roll the sod in one slim conclusion to the end that is contrary. Roll watchfully and gradually; use a sod-reducing knife using a 2inch blade to to interrupt unfastened any sod which could cling to the s Oil.
Carry the sod to the planting region that is new. In the event the roll is overweight to transport use a wheelbarrow.
Lay the roll of lawn sod onto the s Oil area, butting it up against any current garden sod. Carefully unroll the sod. Stagger the ends in order that they do not fall into line with each other in the event you are utilizing rolls of sod. Cut the sod as-needed with all the sod-slicing knife.
Roll a garden roller on the sod that is new to pack the roots contrary to the current soil. Rent a roller using a reservoir for water to help you water the garden sod as you-go helping to mesh the roots of the sod that is new together with the soil.
Inspire progress and water everyday or as-needed to keep the sod moist. Do not walk-on the sod throughout this six-week period.
Mow the garden as-usual following the sod grows onethird taller compared to grass species’ suggested mowing peak.